Filament PLA Bronze ELEGOO

22,43 € sa PDV

Najniža cijena u 30 dana: 22,43 €
Bazna cijena (10.09.2026.) : 22,43 € Bazna cijena je maloprodajna cijena koja je za ovaj proizvod vrijedila na navedeni dan. Ističe se uz aktualnu cijenu radi usporedbe. Nije akcijska cijena niti najniža cijena u zadnjih 30 dana.

Jamstvo 12 mjeseci

Proizvođač

Prodaja na rate bez kamata već od 1.87€ mjesečno

Dodajte 300,00 € u košaricu i ostvarite besplatnu dostavu!

1052 na zalihi

Isporuka 5-10 radnih dana
SKU: 077379 Kategorija: Oznaka:
Opis

PLA Bronze Filament from ELEGOO

Bronze-colored filament from ELEGOO with a subtle metallic sheen allows you to create models that look elegant and stylish. This effect works great for figures, props, costume details and decorations where visual depth and a classic finish are important. The material is based on PLA (polylactide – a plant-based biodegradable plastic), so it is environmentally friendly. There is 1 kg of filament on the spool, which is enough for many medium and large prints.

Szpula filamentu 3D ELEGOO w kolorze miedzianym obok eleganckiego wazonu z falistą, spiralną powierzchnią wydrukowanego w tym samym odcieniu

Stable and clean printing

The product has a diameter of 1.75 mm and a very precise dimensional tolerance (± 0.02 mm), which ensures even feeding into the printer without jamming. It adheres well to the work table and does not create bubbles or excessive threads (known as stringing), which minimizes material waste and saves time. The result is smooth, durable models with a uniform appearance.

Kolekcja figurek wydrukowanych w 3D w kolorze miedzianym, przedstawiająca słonia, lwa na skale, geometryczny ikosahedr, drzewo bez liści oraz antylopę

Practical and eco-friendly spools

Filament spools are made of cardboard, making it easy to recycle and reducing the product’s environmental impact. In addition, each spool is precisely wound by machine and controlled by hand to prevent tangling. Three holes in the spool make it easy to see how much material is left.

Dwie szpule filamentu 3D ELEGOO w kolorze miedzianym

General

Manufacturer ELEGOO
Model 50.203.0465
Color Brown
Weight 1 kg

Recommended print settings

Drying settings before printing 55 ± 5°C
Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)
Nozzle temperature 190 – 230°C
Table temperature (depending on printer and surface) 35 – 65°C
Type of working surface Textured PEI (polyetherimide – a durable, adherent material used as a base for 3D printing) or other compatible surface
Printing speed Less than 300 mm/s

Physical properties

Density 1.26 g/cm³
Melting point 158°C
Deflection temperature under load 57°C
Softening temperature (Vicat test) 62°C

Mechanical properties

Tensile strength (XY-measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 3 MPa
Elongation at break (XY) 10,5% ± 2,1%
Bending strength (XY) 72 ± 5 MPa
Bending modulus (XY) 2993 ± 182 MPa
Impact strength (XY) 66.2 ± 3.9 kJ/m²

https://b2b.innpro.eu/hpeciai/8e97febcdd8a72cd9ed7c6fe841d8bfb/54143_1.jpg

Shipping & Delivery

ISPORUKA

Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.

DOSTAVA

Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.

Prilikom narudžbe proizvoda možete odabrati s kojom  dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.