ELEGOO PLA+ Filament (Blue)

19,55 € sa PDV

Najniža cijena u 30 dana: 19,55 €
Bazna cijena (10.09.2026.) : 19,55 € Bazna cijena je maloprodajna cijena koja je za ovaj proizvod vrijedila na navedeni dan. Ističe se uz aktualnu cijenu radi usporedbe. Nije akcijska cijena niti najniža cijena u zadnjih 30 dana.

Jamstvo 12 mjeseci

Proizvođač

Prodaja na rate bez kamata već od 1.63€ mjesečno

Dodajte 300,00 € u košaricu i ostvarite besplatnu dostavu!

286 na zalihi

Isporuka 5-10 radnih dana
SKU: 077382 Kategorija: Oznaka:
Opis

ELEGOO PLA+ Filament (blue)

ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details. The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced. It is based on PLA+ (polylactide plus – a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.

Szpula błękitnego filamentu

Durability and precision

With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.

Trzy szpule filamentu w niebieskim kolorze

Convenience and compatibility

The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling – a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.

Dwie szpule filamentu pokazane pod różnymi kątami

General

Manufacturer ELEGOO
Model 50.203.0161
Color Blue
Weight 1 kg

Recommended print settings

Drying settings before printing 55 ± 5°C
Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)
Nozzle temperature 200 – 230°C
Table temperature (depending on printer and surface) 35 – 65°C
Type of working surface Textured PEI (polyetherimide – a durable material that holds prints well) or other compatible plates
Printing speed Less than 280 mm/sec

Physical properties

Density 1.30 g/cm³
Melting point 161°C
Deflection temperature under load 56°C
Softening temperature (Vicat test) 63°C

Mechanical properties

Tensile strength (XY – measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa
Elongation at break (XY) 7,9% ± 1,6%
Bending strength (XY) 74 ± 4 MPa
Bending modulus (XY) 2979 ± 156 MPa
Impact strength (XY) 65.5 ± 3.6 kJ/m²

https://b2b.innpro.eu/hpeciai/a0dab99319ff3115929031831b6c6a94/54146_1.jpg

Shipping & Delivery

ISPORUKA

Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.

DOSTAVA

Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.

Prilikom narudžbe proizvoda možete odabrati s kojom  dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.