Tattu Plus 1.0 batteries
The Tattu Plus 1.0 series of industrial batteries has been developed for agro-culture, mapping, plant inspections, as well as other industrial sectors. The battery system is equipped with data logging, safety warnings, power calculation, charge warnings, parameter configuration, etc. The battery can also be communicated with via CAN/SMBU ports.
Safety instructions
Do not discharge below 3.0V per cell. Charge only with a microprocessor-based charger in lithium-polymer pack charging mode.
Do not short-circuit poles, do not puncture, do not expose to direct sunlight, store away from flammable objects, dispose of in specially prepared containers
Multimedia
| Voltage | 44,4 V |
|---|---|
| Capacity | 22000 mAh |
| Number of cells | 12 |
| Connector type | AS150U |
| Balancer type | Molex/JST-XHR |
| Discharge current (continuous) | 25C |
| Discharge current (peak) | 50C |
| Length | 116 mm |
| Width | 172 mm |
| Height | 235.5 mm |
| Weight | 6058 g |
https://b2b.innpro.eu/hpeciai/5385184cf3f33845aed3e935d9cb179e/23873_4.jpg
ISPORUKA
Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.
DOSTAVA
Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.
Prilikom narudžbe proizvoda možete odabrati s kojom dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.
Povezani proizvodi
