PGYTECH Battery Grip
The PGYTECH Battery Grip expands the capabilities of the DJI Pocket 3/4 cameras by combining a more comfortable grip, additional power, and a tripod function in a compact design measuring 113 × 34 × 34 mm. The built-in 4800 mAh battery provides up to 1.4 additional full camera charges, and with a fully charged DJI Pocket 3 and grip, the total runtime can reach up to 390 minutes. The top USB-C port powers the camera directly and allows you to charge it even while recording, so you don’t have to miss a shot just because the battery is running low.
More Power While Recording
When you need to keep shooting, the battery in the grip can recharge the camera without interrupting recording. The grip itself reaches an 80% charge in 70 minutes, and the BMS system includes protection against over-discharge, overvoltage, overcurrent, overload, short circuits, and high and low temperatures, as well as cell protection. The cells used are 3C-certified and approved for transport in carry-on luggage.
A Tripod Always at Hand
The three fold-out legs are integrated into the body, so simply lower them to transform the mount into a tabletop tripod and position the camera without needing an additional stand. When unfolded, the design increases the effective height on the tabletop by 115 mm, providing additional flexibility when positioning the device. There is also a 1/4"-20 threaded hole on the bottom, which allows you to attach tripods and booms, among other accessories, so that the same mount can become part of a more extensive recording setup.
Emergency Power for Other Devices
The rear USB-C port is bidirectional, supporting both power input and output, so the mount can also power a phone or a lighting lamp if needed. The USB-C2 port offers up to 18 W of output power, while the top USB-C1 port, designed for connection to the camera, provides up to 10 W (when both ports are used simultaneously, the maximum power is 15 W).
Designed for the DJI Pocket 3/4
The grip’s contoured design is tailored to the DJI Pocket 3/4, and the quick-release clamp allows you to securely attach it to the camera. The extended grip surface improves comfort and facilitates smooth, precise camera operation, while its weight of 149 g and compact dimensions allow you to conveniently stow the accessory in a pocket or backpack compartment. The body is made of a composite of nylon, aluminum alloy, and silicone. The grip features a built-in battery and a fold-out tripod, and the 1/4"-20 thread on the bottom allows for mounting additional accessories.
Included in the set
- Handle with battery
- Wrist strap
- User manual
| Manufacturer | PGYTECH |
|---|---|
| Model | P-60A-020 |
| Compatibility | DJI Pocket 3/4 |
| Materials | Nylon composite, aluminum alloy, silicone |
| Dimensions | 113 × 34 × 34 mm |
| Weight | 149 g |
| Nominal battery capacity | 4800 mAh |
| Nominal voltage | 3.65 V |
| Number of additional full charges for DJI Pocket 3/4 | Up to 1.4 |
| Operating time | Up to 390 min with a fully charged DJI Pocket 3 and grip |
| Grip charging time | Up to 80% in 70 min |
| Operating temperature range | 0–40°C |
| USB-C1 on top | 5 V / 2 A, max. 10 W |
| USB-C2 on the back | 5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A, max. 18 W |
| USB-C1 + USB-C2 | 5 V / 3 A, max. 15 W |
| Mounting thread | 1/4"-20 |
https://b2b.innpro.eu/hpeciai/cedd08b13035032c5a38e8f42665af3b/65420_1_1.webp
ISPORUKA
Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.
DOSTAVA
Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.
Prilikom narudžbe proizvoda možete odabrati s kojom dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.
Povezani proizvodi
