Anycubic AirPure 2.0 Air Purifier

52,90 € sa PDV

Najniža cijena u 30 dana: 52,90 €
Bazna cijena (10.09.2026.) : 52,90 € Bazna cijena je maloprodajna cijena koja je za ovaj proizvod vrijedila na navedeni dan. Ističe se uz aktualnu cijenu radi usporedbe. Nije akcijska cijena niti najniža cijena u zadnjih 30 dana.

Jamstvo 12 mjeseci

Proizvođač

Prodaja na rate bez kamata već od 4.41€ mjesečno

Dodajte 300,00 € u košaricu i ostvarite besplatnu dostavu!

41 na zalihi

Isporuka 5-10 radnih dana
SKU: 087333 Kategorija: Oznaka:
Opis

Anycubic AirPure 2.0 Air Purifier

The Anycubic AirPure 2.0 air purifier is a compact ventilation system for 3D printers that operates continuously and effectively removes fumes and gases from the build chamber. The device offers an airflow rate of 49.86 CFM, allowing it to quickly vent contaminants outside. With a power supply range of 100–240 V and low power consumption of approximately 12 W, the unit is energy-efficient and convenient for everyday use. A noise level of approximately 45 dB allows for extended operation without significant discomfort. This model is compatible with, among others, the Photon P1 printer and can support one or two printers simultaneously, though in some configurations it requires additional components or their printing.

Flexible ventilation tube connected to a 3D printer and routed out through a window

Constant ventilation and comfortable operation

AirPure 2.0 runs continuously once started, constantly removing contaminated air from inside the printer. This solution reduces the buildup of fumes and improves indoor air quality. This is particularly important during long-duration prints, where odor emissions are more intense. As a result, using the printer becomes more comfortable and less of a nuisance.

Two 3D printers placed side by side on a table, both connected to the ventilation system

Performance and energy efficiency

With a performance of nearly 50 CFM, the device quickly removes air from the working chamber. At the same time, low power consumption of approximately 12 W helps reduce energy usage during continuous operation. This allows the system to be left on for many hours without any issues. The constant airflow also supports stable operating conditions for the printer.

3D printer connected to a ventilation tube leading to the wall next to a window

Mounting and installation requirements

AirPure 2.0 can be mounted near a ventilation opening or in a window, depending on available space. For different types of windows, additional mounting components may be required, which are not always included in the kit. For casement windows, separate sealing accessories are required. It is also important to consider the diameter of the pipes, which is typically around 60–80 mm, to properly prepare the installation site.

Rear of the device with a flexible ventilation tube connected

Included in the package

  • Main unit
  • Exhaust hose
  • Intake hose
  • Clamp
  • Power adapter
  • User manual

Manufacturer Anycubic
Model AirPure 2.0
Compatibility Photon P1
Rated voltage 100–240 V, 50/60 Hz
Output power 12V / 1A
Fan speed 3800 (±10%) RPM
Noise level 45 ±3 dB
Operating range 8–40°C, humidity 20–90%

https://b2b.innpro.eu/hpeciai/5e9caf23d4bc912672a09b6e1e7fdeda/60471_1.jpg

Shipping & Delivery

ISPORUKA

Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.

DOSTAVA

Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.

Prilikom narudžbe proizvoda možete odabrati s kojom  dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.