Filament dryer ELEGOO H1 HT

89,70 € sa PDV

Najniža cijena u 30 dana: 89,70 €
Bazna cijena (10.09.2026.) : 89,70 € Bazna cijena je maloprodajna cijena koja je za ovaj proizvod vrijedila na navedeni dan. Ističe se uz aktualnu cijenu radi usporedbe. Nije akcijska cijena niti najniža cijena u zadnjih 30 dana.

Jamstvo mjeseci

Proizvođač

Prodaja na rate bez kamata već od 7.48€ mjesečno

Dodajte 300,00 € u košaricu i ostvarite besplatnu dostavu!

Nema na zalihi

Isporuka 5-10 radnih dana
SKU: 092235 Kategorija: Oznaka:
Opis

ELEGOO H1 HT Filament Dryer

The ELEGOO H1 HT helps properly prepare filament before printing and keep it in good condition during operation, offering a drying temperature of up to 85°C. As a result, it works well with both popular materials, such as PLA and PETG, and filaments that require higher temperatures, including PA and PC. Automatic spool rotation ensures even drying, while active moisture extraction helps prevent the material from reabsorbing moisture. Operation is made easy by a 3.5-inch touchscreen with 11 preset modes, while a separate filament outlet allows for convenient use of TPU and fiber-reinforced materials as well. The device is complemented by a comprehensive set of safety features and broad compatibility with FDM 3D printers, without the need to rely on a single manufacturer’s closed ecosystem.

Angled 3D printing material dryer with a visible blue material spool. A touchscreen displays the parameters.

Drying at temperatures up to 85°C

The ELEGOO H1 HT’s capabilities allow you to work with many more types of materials than just the most popular filaments used in everyday 3D printing. A maximum drying temperature of 85°C allows you to work with PLA and PETG, as well as thermally demanding materials such as PA or PC. As a result, a single dryer can be used for both simple projects and more advanced prints using engineering filaments.

Desktop 3D printing filament dryer with printed objects, a pen holder, and a lamp.

Uniform conditions across the entire spool

During drying, the spool rotates automatically, ensuring that each section of the filament is evenly exposed to heat. This solution promotes a more consistent process and minimizes situations where part of the material remains less well-prepared than the rest. The H1 HT also actively manages humidity inside the chamber—during operation, it automatically vents moist air and then seals the interior, helping to maintain dry conditions for the filament.

Two 3D printing filament dryers on a desk, each with a spool of filament. A 3D printer with two additional spools stands next to them.

Ready for demanding filaments as well

The design has been adapted not only for standard materials but also for filaments that may pose greater challenges when fed into the printer. A dedicated bypass outlet allows for the feeding of, among other things, flexible TPU and fiber-reinforced filaments. This allows the material to be conveniently fed out of the dryer even when its properties make it difficult to use the standard feed path, which increases flexibility when working with various projects and filament types.

Front view of a 3D printing filament dryer with a touchscreen and a visible filament spool under a transparent cover.

Control Without Unnecessary Complications

You can conveniently control the drying parameters using a 3.5-inch touchscreen, which also provides a preview of the current operating status. You have 11 preset modes at your disposal, allowing you to quickly adjust the settings to the material you’re using without having to configure the process from scratch each time. The intuitive controls make it easy to both prepare the filament before printing and monitor the drying process while the printer is running.

A side view of the 3D printing filament dryer standing next to the 3D printer. Both devices feature the ELEGOO logo.

Safe Operation and Broad Compatibility

The ELEGOO H1 HT incorporates several features designed to monitor the device’s status and enhance safety during the drying process. The system includes overheating protection, a flame-retardant inner housing, detection of lid opening and fan malfunction, and can also trigger an audible alarm if a fault is detected. Moreover, the dryer does not require a closed ecosystem of devices from a single brand—it works with nearly all 3D printers using FDM technology, allowing you to easily integrate it into your existing printing setup.

The image shows a 3D printing filament dryer that connects wirelessly to various 3D printer models.

Included in the set

  • ELEGOO H1 HT filament dryer
  • desiccant × 2
  • power cord
  • PTFE tubing
  • pneumatic connector
  • user manual

Manufacturer Elegoo
Model H1 HT
Pre-set filament types 11 types – PLA, PETG, TPU, ABS, ASA, PET, PP, PC, PA, PAHT-CF, PVA
Drying temperature 45–85 °C (113–185 °F)
Drying time 0.5–12 hours
Dimensions 280 × 256 × 126 mm
Weight 1.55 kg
Housing material PC, PA
Display 3.5-inch color touchscreen (English/Chinese)
Inner Coating Flammability Rating UL 94 V-0
Ambient Temperature 5–40 °C (41–104 °F)
Filament Diameter 1.75 mm
Spool Compatibility Width: 50–68 mm; Diameter: 197–202 mm
Noise Level ≤ 38 dB (measured in an environment with a noise level of 27 dB)
Reference energy consumption 0.386 kWh (220 V, ambient temperature 25 °C, drying at 85 °C for 8 hours)
Printer Compatibility Universal; works with all brands
Power Supply 100–240 V AC, 50/60 Hz
Rated Power 150 W at 220 V; 130 W at 110 V
Rotary drying Supported
Open-lid detection Supported
Active drying Supported
Print-ready storage Up to 10 days (25 °C/60% relative humidity)

https://b2b.innpro.eu/hpeciai/9724e8cf7de798fec6d4db97a96a5a10/64133_1_1.webp

Shipping & Delivery

ISPORUKA

Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.

DOSTAVA

Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.

Prilikom narudžbe proizvoda možete odabrati s kojom  dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.