xTool SafetyPro™ AP2 Max smoke canister

3.085,45 € sa PDV

Najniža cijena u 30 dana: 3.085,45 €
Bazna cijena (10.09.2026.) : 3.085,45 € Bazna cijena je maloprodajna cijena koja je za ovaj proizvod vrijedila na navedeni dan. Ističe se uz aktualnu cijenu radi usporedbe. Nije akcijska cijena niti najniža cijena u zadnjih 30 dana.

Jamstvo 24 mjeseci

Proizvođač

Prodaja na rate bez kamata već od 257.12€ mjesečno

Dodajte 300,00 € u košaricu i ostvarite besplatnu dostavu!

5 na zalihi

Isporuka 5-10 radnih dana
SKU: 081295 Kategorija: Oznaka:
Opis

xTool SafetyPro™ AP2 Max Smoke Absorber

The xTool SafetyPro™ AP2 Max is an industrial smoke absorber designed for users of professional laser engravers and cutters. The device ensures maximum air purity by eliminating smoke, odors and toxic substances right at the source. With a huge capacity of 700 m³/h and an advanced seven-layer filtration system, the product creates a safe and comfortable working environment even when used for long hours.

The xTool laser engraver on a white cart next to a white smoke absorber with green elements in the workshop

Seven layers of complete protection

The SafetyPro™ AP2 Max uses a seven-layer filtration system that removes both large particles and microscopic fines and harmful gases from the air. The SuperCyclone filter captures 99% of particles over 5 μm in diameter and protects subsequent layers from clogging. Pre-filter and medium efficiency filters eliminate dust, fibers and up to 95% of PM2.5 fine dust, while two carbon layers – activated carbon and ultra-dense carbon mesh – neutralize volatile organic compounds and 99.99% of odors. A formaldehyde filter breaks down toxic HCHO into water and carbon dioxide, reducing its concentration. The final barrier is the HEPA filter, which traps 99.97% of particles, allergens and viruses as small as 0.3 micrometers.

White xTool smoke canister with five green elements on wheels on a bright background

SuperCyclone – longer filter life, lower costs

The innovative SuperCyclone system makes the entire filtration process more efficient and cost-effective. It is reusable and its design prevents clogging of successive layers. This extends the life of the pre-filter by up to ten times, which means less frequent replacement, less material consumption and lower operating costs.

Visualization of the air filtration system in the xTool smoke canister with blue backlighting

Quiet, efficient operation and precise control

The 900-watt motor generates a stable airflow with a noise level of only about 65 dB, which helps maintain acoustic comfort in the workshop or workshop. In addition, the airflow regulation from 1 to 100% allows you to perfectly adjust the operation of the device to the current conditions and the type of material being processed.

Collage of four photos showing laser engraving, welding, soldering electronics and wood cutting

Manufacturer xTool
Name SafetyPro™ AP2 Max
Model P0101000132
Airflow capacity 700 m³/h
Filtration system 7-layer
Number of cyclones 72
Airflow adjustment range 1-100% (precise control)
Noise level 65 dB
Power Up to 900 W
Dimensions 662 x 452 x 845 mm
Compatibility xTool P3, MetalFab and all other xTool laser engravers

https://b2b.innpro.eu/hpeciai/f9deee680805fb228ec6b7aecc26d726/55556_1.jpg

Shipping & Delivery

ISPORUKA

Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.

DOSTAVA

Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.

Prilikom narudžbe proizvoda možete odabrati s kojom  dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.