ELEGOO PLA+ Filament (Orange)

16,67 € sa PDV

Najniža cijena u 30 dana: 16,67 €
Bazna cijena (10.09.2026.) : 16,67 € Bazna cijena je maloprodajna cijena koja je za ovaj proizvod vrijedila na navedeni dan. Ističe se uz aktualnu cijenu radi usporedbe. Nije akcijska cijena niti najniža cijena u zadnjih 30 dana.

Jamstvo 12 mjeseci

Proizvođač

Prodaja na rate bez kamata već od 1.39€ mjesečno

Dodajte 300,00 € u košaricu i ostvarite besplatnu dostavu!

Nema na zalihi

Isporuka 5-10 radnih dana
SKU: 077381 Kategorija: Oznaka:
Opis

ELEGOO PLA+ Filament (orange)

ELEGOO filament in orange is a great option for those looking for intense, well-saturated colors. The material has a smooth surface and provides high print detail, which works well for both prototypes and decorations. It is based on PLA+ (polylactide plus – a biodegradable material of plant origin, enriched with additives to increase durability). The spool contains 1 kg of filament.

Drukarka 3D ELEGOO na drewnianym stole obok kolorowych szpul filamentu w różnych kolorach

Durability and precision

With increased resistance to cracking and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print. A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages. Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.

Dwie szpule filamentu ELEGOO w kolorze pomarańczowym

Convenience and compatibility

The material is wound evenly and checked by hand, reducing the risk of tangles. The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away. The product fits most FDM (Fused Deposition Modeling – a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.

Stos kolorowych szpul filamentu 3D ułożonych w dwie kolumny

General

Manufacturer ELEGOO
Model 50.203.0073
Color Orange
Weight 1 kg

Recommended print settings

Drying settings before printing 55 ± 5°C
Ambient temperature and humidity ≤ 50°C, ≤ 20% relative humidity (store with moisture absorber)
Nozzle temperature 200 – 230°C
Table temperature (depending on printer and surface) 35 – 65°C
Type of working surface Textured PEI (polyetherimide – a durable material that holds prints well) or other compatible plates
Printing speed Less than 280 mm/sec

Physical properties

Density 1.30 g/cm³
Melting point 161°C
Deflection temperature under load 56°C
Softening temperature (Vicat test) 63°C

Mechanical properties

Tensile strength (XY – measurement made in the horizontal plane of the print, where the material is strongest) 38 ± 2 MPa
Elongation at break (XY) 7,9% ± 1,6%
Bending strength (XY) 74 ± 4 MPa
Bending modulus (XY) 2979 ± 156 MPa
Impact strength (XY) 65.5 ± 3.6 kJ/m²

https://b2b.innpro.eu/hpeciai/83696fac8fc7f8177fe00b5ff079bc7c/54145_1.jpg

Shipping & Delivery

ISPORUKA

Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.

DOSTAVA

Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.

Prilikom narudžbe proizvoda možete odabrati s kojom  dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.