Creality SpacePi X4 Filament Dryer

179,40 € sa PDV

Najniža cijena u 30 dana: 179,40 €

Jamstvo 24 mjeseci

Proizvođač

Prodaja na rate bez kamata već od 14.95€ mjesečno

Dodajte 300,00 € u košaricu i ostvarite besplatnu dostavu!

678 na zalihi

Isporuka 5-10 radnih dana
SKU: 076202 Kategorija: Oznaka:
Opis

Creality SpacePi X4 Filament Dryer

Creality SpacePi X4 is a powerful dual-chamber filament dryer, allowing you to dry as many as 4 spools simultaneously with full temperature control from 45 to 85°C. Thanks to the active drying technology, fast heating and quiet operation, you will prepare PLA, PETG, TPU, ABS or PA-CF filaments for printing in a reproducible and stable way, eliminating the problem of moisture, bubbles and shagging during printing.

Cztery drukarki 3D Creality z kolorowymi modelami obok suszarki do filamentu Creality SpacePi X4, z której wychodzą przewody prowadzące do każdej drukarki.

Dry a variety of filaments

The device features two independently controlled heating chambers, allowing you to set different temperatures for different filaments (e.g. 50°C for PLA and 85°C for PA-CF). You can use one or both chambers as needed, which saves time and energy in a small workshop or when working with different materials at the same time.

Suszarka do filamentu Creality SpacePi X4 z dwoma komorami wypełnionymi kolorowymi filamentami stoi na drewnianym stole, obok niej figurki z druku 3D i modele statków kosmicznych.

Speed and uniformity

With 200W + 200W PTC heaters, SpacePi X4 heats up to 85°C in about 20 minutes. The 360° air circulation ensures even heat distribution, and the SpaceDry 4.0 technology with active dehumidification and desiccant regeneration guarantees effective moisture removal without changing cartridges.

Suszarka do filamentu Creality SpacePi X4 podłączona do drukarki 3D Creality stoi na stoliku, w tle siedzi mężczyzna korzystający z telefonu.

Quiet, cheap, efficient

The Active Silent system keeps noise levels to just 43-46 dB, allowing you to work comfortably at home and in the workshop. The Creality SpacePi X4 offers energy-efficient operation with an energy consumption of 0.124 kWh in single-chamber mode and 0.208 kWh in dual-chamber mode, reducing the cost of preparing filaments for printing.

Mężczyzna w niebieskiej koszuli stoi przy stole z suszarką do filamentu Creality SpacePi X4 z kolorowymi szpulami filamentów, obok leżą wydrukowane modele i filamenty w różnych kolorach.

Wide compatibility

The Creality SpacePi X4 filament dryer supports spools up to 200 mm in diameter and 150 mm in width with 1.75 mm and 2.85 mm diameter filaments. So you can dry both standard 1 kg spools and larger spools weighing 2 kg.

Zbliżenie na otwarte pokrywy suszarki do filamentu z widocznymi szpulami pomarańczowego, zielonego i przezroczystego filamentu w środku.

Safe operation

The Creality SpacePi X4’s triple protection system includes fan control, heater temperature protection and sensors that monitor the temperature in the chambers. This allows you to use the device without worrying about overheating or damaging the filaments.

Suszarka do filamentu Creality SpacePi X4 z zamkniętymi pokrywami i podświetlonymi szpulami pomarańczowego filamentu, wyświetlająca parametry na ekranie dotykowym.

Everyday convenience

The dryer is equipped with a chamber backlight, a sliding lock, anti-burn rollers and a moisture-proof seal to ensure comfort. In addition, the device signals the end of drying with a sound, making it easy to use.

Creality SpacePi X4 z zielonym i czerwonym filamentem stoi na stole, w tle siedzi mężczyzna przy biurku; obok widać modele z druku 3D.

You control as you please

The EDry UI panel allows you to precisely control drying parameters, including temperature, drying time (1-48 hours) and threshold humidity. You can use automatic modes or custom settings to tailor the drying process to the requirements of your specific filament.

Mężczyzna dotyka ekranu dotykowego suszarki do filamentu Creality SpacePi X4, która stoi obok drukarki 3D Creality K1C.

Included:

  • Filament dryer
  • Power cord
  • User manual

Manufacturer Creality
Model SpacePi X4
Manufacturer code 4005010100
Rated power 360W
Temperature range 45~85°C
Drying time 1-48 h
Input voltage 220-240V50/60Hz
Supported filament Spool diameter: ≤200 mm
Width: ≤150 mm
Filament diameter: 1.75 / 2.85 mm
Dimensions 382 × 290 × 270 mm
Weight 5 kg

https://b2b.innpro.eu/hpeciai/12c347d9b139d1129ab2e18ca4a9003f/53987_1.jpg

Shipping & Delivery

ISPORUKA

Isporuka naručenih proizvoda je 5-10 radnih dana. Svi proizvodi dolaze s EU skladišta sa svim potrebnim certifikatima.

DOSTAVA

Nakon što Vaša narudžba stigne u naše skladište, ista se kontrolira te priprema za slanje na Vašu adresu.

Prilikom narudžbe proizvoda možete odabrati s kojom  dostavnom službom želite primiti paket (Overseas, DPD). Također, narudžbu je moguće naručiti direktno u paketomat (BOX NOW).
Od zaprimanja Vaše narudžbe u naše skladište, rok isporuke je najkasnije dva dana.